WATERPROOFING FOR BUILDINGS AND CIVIL WORKS
EVOTEC 4 Kg (-5 degrees C)
EVOTEC APP 4 kg self-protected red and grey. Prefabricated waterproofing membrane based on distilled bitumen and plastomeric polymers, type APP, with composite reinforcement of continuous-strand polyester non-woven fabric, offering high mechanical properties and excellent dimensional stability. The V versions have reinforcement with rot-proof fiberglass for high dimensional stability. The PA and VA versions are self-protected on the upper surface with slate, which reduces heat absorption and increases the membrane's durability. The PA and VA versions are equipped with a 10 cm side strip and a 15 cm header strip to facilitate sealing and improve water retention on roofs.
UNITEC PA GREY
4 kg (-5 degrees C) APP
Prefabricated waterproofing membrane based on distilled bitumen and plastomeric polymers (APP type), reinforced with non-woven composite fabric of continuous wire polyester fiber, with good characteristics and excellent dimensional stability.
The PA versions are self-protected, on the upper face, with slate flakes that reduce heat absorption on the surface
improving the durability of the membrane.
The self-protected versions are equipped with a 10 cm side ridge and, upon request, a 15 cm header to facilitate joining and sealing the sheets.
TECH 1000
4,5 Kg (-20 grados C) SBS
4,5 Kg (-20 grados C) SBS
TECH 1000 SBS 4.5 kg Self-Protected Red Prefabricated Waterproofing Membrane made of distilled bitumen and elasto-plastomeric polymers, type SBS, with a composite reinforcement of continuous-strand polyester non-woven fabric, offering high mechanical properties and excellent dimensional stability. It is self-protected on the upper surface with slate, which reduces heat absorption and increases the membrane's durability. It also features a 10 cm side hem and, if necessary, a 15 cm hem at the top to facilitate joining and improve the stability of the layers.
PLURA SELF-ADHESIVE 4 Kg (-10 degrees C)
PLURA SELF-ADHESIVE 4 kg Self-Protected Red Composite Self-Adhesive Waterproofing Membrane. PLURA SELF-ADHESIVE bituminous membranes represent the culmination of the latest generation of membranes known as "composite" membranes. These membranes are so unique because, thanks to a new production technology, materials with different waterproofing masses can be created, leading to the optimal exploitation of the properties of each component and satisfying diverse requirements. The production process utilizes three different types of components, produced in separate solvents and sent to the corresponding application sections on the production line. The first stage involves impregnating the continuous-strand polyester reinforcement with a specific mixture designed to saturate the porosity, ensuring compatibility and enhancing the elastic and plastic properties of the masses applied successively to the upper and lower surfaces. In the second stage, a different waterproofing mass is applied to the upper surface, depending on the intended use of the membrane. In the third step, a special component with optimal adhesive properties is applied to the underside, its thickness being precisely calibrated. PLURA SELF-ADHESIVE membranes are capable of meeting diverse application and functional requirements, offering numerous significant advantages such as ease of installation, resulting in cost savings, and the possibility of applying them to surfaces sensitive to flame and heat. Therefore, PLURA SELF-ADHESIVE is unsurpassed for waterproofing wooden structures, heat-sensitive insulating panels, deck roofs, and the restoration of historical and artistic roofs. Furthermore, PLURA SELF-ADHESIVE allows for use in particularly challenging waterproofing projects (e.g., wrapping plastic pipes) and can be installed using traditional flame or hot air methods, achieving high adhesion. PLURA SELF-ADHESIVE guarantees perfect, complete adhesion to the substrate, ensuring exceptional wind resistance for the waterproofing system and preventing accidental leaks. PLURA SELF-ADHESIVE has a core made of continuous-strand polyester non-woven fabric with high mechanical properties. The underside of PLURA SELF-ADHESIVE is protected with a removable plastic film. The top side is self-protected with slate particles that reduce heat absorption on the membrane surface; it also has a 10 cm removable side film to ensure overlap alignment. In the P version, the top side is protected with PE film or, upon request, with PPL non-woven fabric.
EVOTEC
4.5 kg (-5 degrees C) APP
Prefabricated waterproofing membrane based on distilled bitumen and plastomeric polymers, type APP, with composite reinforcement in non-woven fabric in continuous yarn polyester fiber, with high mechanical characteristics and excellent dimensional stability.
The PA versions are self-protected, on the upper face, with slate shingles, which reduce heat absorption on the surface.
increasing the durability of the membrane.
The PA versions are provided with a 10 cm side band and a 15 cm head, to facilitate joints and water retention of roofs.
PLURA STRIP SISTEMA BALCONY
Self-adhesive composite waterproofing membrane for balcony and terrace renovation
PLURA STRIP BALCONY SYSTEM is a self-adhesive composite waterproofing membrane for the renovation of balconies and terraces. It has a composite fabric reinforcement made of continuous wire polyester fiber, with high mechanical properties and dimensional stability. The unique slate micro-scaglia surface finish makes the PLURA STRIP MEMBRANE BALCONY SYSTEM suitable for subsequent flooring installation using cementitious adhesives. The underside of the product has self-adhesive strips designed to allow for strong yet partial adhesion of the PLURA STRIP BALCONY SYSTEM membrane. This special finish guarantees 50% adhesion while leaving the vapor permeability of the underlying flooring unaffected, eliminating the problem of air bubbles.
PLUSTEC 4 mm in selvedges /5 Kg (-10 degrees C)
APP waterproofing membrane (-10 degrees C)
Prefabricated waterproofing membrane made of distilled bitumen and elastoplastomers (APP type) with a composite reinforcement of continuous-wire polyester fiber nonwoven fabric, giving the membrane high mechanical properties and excellent dimensional stability. The PA versions are self-protected on the upper surface with slate flakes that reduce heat absorption, improving the membrane's durability. The self-promoting versions have a 10 cm lateral overlap.
INTERTEC MELANGE
4 kg (-10 degrees C)
APP waterproofing membrane
Prefabricated waterproofing membrane based on distilled bitumen plastomer polymers (APP type), with composite reinforcement in a non-woven continuous wire polyester fiber fabric, with good
Excellent mechanical properties and dimensional stability. The membrane is self-protected on its upper surface with slate flakes.
which reduce heat absorption on the surface, improving the membrane's durability. The self-protecting versions are equipped with
a 10 cm lateral cimosa.
APPROX 4 mm (-10 degrees C)
Prefabricated waterproofing membrane made of distilled bitumen and plastomeric polymers, type APP, with a composite reinforcement of continuous-strand polyester non-woven fabric, offering high mechanical properties and excellent dimensional stability. The PA versions are self-protected on the upper surface with slate, which reduces heat absorption and increases the membrane's durability. The PA versions also feature a 10 cm side strip and a 15 cm header strip to facilitate sealing and improve water retention on roofs.
APP 5 Kg self-protected white (-10 degrees C)
Prefabricated waterproofing membrane made of distilled bitumen and plastomeric polymers, type APP, with a composite reinforcement of continuous-strand polyester non-woven fabric, offering high mechanical properties and excellent dimensional stability. The PA versions are self-protected on the upper surface with slate, which reduces heat absorption and increases the membrane's durability. The PA versions also feature a 10 cm side strip and a 15 cm header strip to facilitate sealing and improve water retention on roofs.
TECH MILLENNIUM HP 4 Kg PPL TNT
(-20 grados C)
(-20 grados C)
Prefabricated waterproofing membrane based on distilled bitumen polymers and SBS and CPB type elastomer (polyolismic mixture polypolymers)
Prefabricated waterproofing membrane made from polymers distilled from bitumen and SBS and CPB type elastomers (a polyolefin blend of polypolymers) using metalloid catalysts, with a composite reinforcement of continuous-strand polyester nonwoven fabric, giving the membrane high mechanical properties and excellent stability. The P versions are finished on the upper surface with polypropylene nonwoven fabric, which enhances pedestrian safety and allows for immediate painting. This particular upper surface finish offers multiple advantages, including: improved aesthetics; enhanced pedestrian safety of the waterproofing membrane; improved coefficient of friction, preventing slippage, especially on pitched roofs; easier painting, both in terms of application time (it can be done immediately after application) and appearance; increased resistance to laceration. This is useful in mechanical fastening, where it greatly improves the membrane's performance in securing the washer (less deformation); and easier intersections. The non-woven fabric is perfectly compatible with the waterproofing compound and, in fact, increases adhesion between layers. The PA version is self-protecting, with slate flakes on the upper surface that reduce heat absorption, improving the membrane's durability.
CANADIAN TILES
Invented in 1863, Canadian shingles are among the most widely used roofing materials for residential units worldwide. Beyond their inherent aesthetic appeal, these tiles offer a variety of benefits to homeowners, installers, architects, developers, and investors. Advantages of Superglass shingles: Three-tone shingles made with high-quality fiberglass and bitumen; proven superior performance and increased traffic; exceptional value; and high resistance to color fading.
IMPER SV
BITUMINOUS TRANSPIRABLE WATERPROOFING SHEET UNDER ROOF
Therefore, its use is indicated in the following cases: It is an "under-tile" element that can ensure watertightness in case of roofing material failure. Its lightness and mechanical strength make it a reliable and easy-to-apply element on wooden roofs; As a "vapor barrier" element before applying the waterproofing agent, in all applications where an absolute "vapor barrier" is not required (for which there are special products with embedded metallic foil capable of completely blocking vapor transmission); In order to achieve a vapor pressure equalization layer (in this case, the use of appropriate vapor desulfurizers), it must be reconditioned and re-conditioned. It is used in all types of structures as a separating element between the waterproofing and subsequent elements (for example, heavy protection, to protect the waterproofing).
LIQUID WATERPROOFING,
REFLECTIVE PAINT, FIXATIVE AND PRIMER
ECOPRIMER
Water-based bituminous primer for waterproofing substrates. This water-based bituminous primer is used in construction as a base coat to seal the concrete's pores and dust, allowing for the rapid application of polymer-modified bitumen membranes. It is characterized by its adhesion, good surface penetration, and, above all, its water-based composition. Therefore, it is non-flammable and safe for the user.
DRUGS
Liquid waterproofing membrane. Decorative, elastomeric, pigmented, waterproofing liquid membrane based on modified acrylic copolymers in aqueous dispersion. IDROGUM reduces carbonation in concrete. After drying, it forms a tough, elastic film that adheres perfectly to the manufactured products to which it is applied, resistant to atmospheric agents and micro-cracks that may form in the substrate.
FIBERGLASS MESH
REFORZAGLAS
Fiberglass mesh
1m X 50 m
Fiberglass mesh. Suitable for reinforcing waterproofing of roofs and terraces, preventing the appearance of cracks and fissures.
GRACE 100
Non-woven fabric in synthetic fiber
20 cm X 50 m
100 cm X 50 m
Reinforcement armor for TECADEM
SHEATH, FYBRO HP, MONOFLEX , IDROGUM.
in liquid waterproofing work.
hot.
SLATE FIX
Clear fixing varnish for ceramic and slate grain. Water-based fixing varnish. Milky white in color, it becomes transparent after drying. SLATE FIX is a special paint designed to protect and fix ceramic and slate grain to the polymer bitumen membrane, while enhancing the grain's color thanks to the wet-look effect the fixative provides.
VOLTAIC
VOLTAIKA is a special, single-component white coating specifically designed to increase the efficiency of photovoltaic systems and protect polymer and bitumen membranes. VOLTAIKA can also be applied to plaster, concrete, and fiber cement surfaces, as well as wood, metal, roof tiles, and shingles. It is particularly suitable for protecting polymer and sandblasted bitumen membranes, self-protected with slate, or non-woven polypropylene fabric. This results in substantial energy savings for the building. Furthermore, its high emissivity promotes the dissipation of accumulated heat at night.
FYBRO HP
Fiber-reinforced liquid waterproofing membrane
FYBRO HP is a one-component liquid product based on synthetic elastomers in a photocrosslinked aqueous dispersion. It comes in the form of a creamy mass made of fibrorin, applicable to horizontal and vertical surfaces. Once polymerized, it forms a continuous, elastic, waterproof membrane resistant to thermal changes, ultraviolet rays, and standing rain. It adheres perfectly to a variety of substrates, such as oil-filled roofs, concrete, fiber cement, wood, and metal surfaces. FYBRO HP is used for waterproofing roofs, domes, curved roofs, terraces, and balconies, both old and new, with serviceability; for waterproofing eaves and fiber cement roofs. It is also used for restoring asphalt roofing felt waterproofing.
AUXILIARY PRODUCTS
Pratiko Mastic
Bituminous mastic for repair, sealing, fitting, and bonding. PRATIKO MASTIC is a flexible bituminous mastic reinforced with synthetic fibers that, once dry, forms a plastic layer with excellent adhesion. PRATIKO MASTIC has excellent adhesion to bituminous surfaces, galvanized sheets, smooth and corrugated metal sheets, concrete, fiber cement, etc., and this adhesion remains constant over time. The product has high resistance to aging, UV radiation, and atmospheric agents. PRATIKO MASTIC can also be applied at temperatures below 0°C, on slightly damp surfaces, and is compatible with all types of bituminous membranes.
BIT-TAPE
Waterproof self-adhesive bituminous tapes
Self-adhesive, waterproof bituminous tapes, consisting of bitumen-elastomer compounds and protected by reinforced aluminum foil. The reinforced aluminum foil covering the strips ensures safe and reliable application over time, as it protects the tape compound from all factors that could compromise its integrity, such as gas, light, or UV rays. BIT-TAPEs allow for repairs and waterproofing with a long lifespan: their effectiveness only decreases when the protective foil is completely consumed by oxidation.
FUND PLASTIC
HDPE stone membrane to protect the waterproofing of the foundation wall
The FONDPLAST masonry membrane, applied to foundation walls, protects the waterproofing layer both during the re-adhering phase and during the settling of the building and the soil itself. It will also become an effective antibacterial mechanical barrier over time. The Fondplast membrane is a high-density polyethylene product and can be applied both as vertical protection and as a horizontal barrier against rising damp. It remains stable over time, does not contaminate the water it comes into contact with, and does not release any pollutants.
ANGULAR ELEMENTS AND EXHALATOR
The original and exclusive PLUVITEC accessory system is protected by a European patent. Its application is simple and economical: it requires the same equipment used for waterproofing and the same installation system, widely used by professionals in the sector. They are safe and reliable, as they form a single unit, blending seamlessly with the waterproofing.
GEOTEXTILES
100% polyester fiber fabric
Geotextiles for application in roads, railways, earth buildings, foundations and support structures, drainage systems, erosion control, reservoirs and dams, canals, tunnels, landfills, liquid waste containment projects.
FINISH PROFILE
Aluminum profile for installation at the junction between a waterproof membrane and a vertical surface or chimney. Provides optimal waterproofing and an aesthetically pleasing finish. Resistant to aging caused by weathering agents such as humidity, frost, and UV rays.
BLOWTORCH
Torch made specifically for the application of waterproofing membranes
It guarantees excellent performance and high efficiency, thanks to its powerful flame. This has been achieved by paying close attention to safety, health, and environmental protection, while also considering ergonomics and noise levels. It is equipped with a quick-opening lever and a pilot valve that fully opens and closes the gas supply and adjusts the ignition light to the minimum. This model features a bell that ensures excellent performance and is made with brass valves and a plastic handwheel. It is carefully welded to the flame, with a silver alloy inlet, and each part undergoes rigorous testing. The entire range is available in the standard version or with accessories.